Conserte seus objetos Comunidade Loja

Grundig TK125 Transport Belts Replacement

Introdução

These 6 steps explain to remove bottom and top covers.. at the bottom side remove the plate (2 screws) which hold the flywheel axle.. this is your opening to replace the 2 belts, forst the biggest belt for the flywheel, the the midsize belt for the drive.. all good..

  1. Grundig TK125 Transport Belts Replacement, Transport Belts: passo 1, imagem 1 %32 Grundig TK125 Transport Belts Replacement, Transport Belts: passo 1, imagem 2 %32

    • I have ordered a new belt set on aliepxress, to be continued once i received them

    Editar

  2. Grundig TK125 Transport Belts Replacement: passo 2, imagem 1 %32

    • These are the 3 belts needed (if all) for the TK125, the biggest is needed for the flywheel, the midsize of for the drive and the smallest of for the counter.

    Editar

  4. Grundig TK125 Transport Belts Replacement: passo 3, imagem 1 %32 Grundig TK125 Transport Belts Replacement: passo 3, imagem 2 %32

    • Now remove the bottom and the top covers so you can reach both sides of the recorder

    Editar

  5. Grundig TK125 Transport Belts Replacement: passo 4, imagem 1 %32 Grundig TK125 Transport Belts Replacement: passo 4, imagem 2 %32

    • Remove the flywheel axle restplate, here is your opening to replace both the belts

    Editar

  6. Grundig TK125 Transport Belts Replacement: passo 5, imagem 1 %32

    • first you place the large flywheel belt, then you place the midsize belt for the drive

    Editar

  7. Grundig TK125 Transport Belts Replacement: passo 6, imagem 1 %32

    • this is the small belt for the counter

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 1 outro contribuidor

Joenymus

Membro desde: 03/09/24

148 Reputação

Autoria de 1 guia

Emblemas: 3

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 3

Duração total: 16