Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement

Introdução

EVSE charging stations are expensive to manufacture and install, and replacing a charging cable on an EVSE charging station is a good idea as it enhances safety by reducing the risk of injury from frayed or damaged cables. By keeping the charging station in use and replacing its parts when necessary, we can maximize the value of the resources used to create it.

In this guide, we will be removing the old charging cable with gun on a Grizzl-E Classic EV Charging Station and replacing it with a new one.

O que você precisa

Passo 1 Charging Cable with Gun

Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement, Charging Cable with Gun: passo 1, imagem 1 %32

Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement, Charging Cable with Gun: passo 1, imagem 2 %32

Ensure the circuit breaker supplying power to the electrical socket is switched off.
Unplug the charging station from the electrical socket.

Editar

Passo 2

Remove the safety pin from the mounting bracket located on the rear of the charging station.

Editar

Passo 3

Lift and pull the charging station off the mounting bracket.

Editar

Passo 4

Remove the four screws located in each corner of the front of the charging station using a 4 mm Allen key.

Editar

Passo 5

Remove the front plate to reveal the interior of the unit.

Editar

Passo 6

Grizzl-E EVSE Charging Station Charging Cable with Gun Replacement: passo 6, imagem 3 %32

On the bottom-right side of the unit, you will see four wires, each screwed into electrical terminals on the unit's motherboard.
Unscrew each of the four screws from the electrical terminals using a Phillips screwdriver to remove each of the four wires.

Editar

Passo 7

Unscrew the cable connector on the bottom-right side of the charging station.
Twist the cable connector counterclockwise to remove it.

Editar

Passo 8

Firmly pull out the cable towards you through the bottom of the charging station.
Once the cable is removed, replace the old charging cable and gun with a new one.

Editar