Pular para o conteúdo principal
  1. Power off your GoPro before beginning disassembly.
    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

  2. Gently pry the back open by inserting a metal spudger between the case and back panel.
    • Gently pry the back open by inserting a metal spudger between the case and back panel.

  3. Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.
    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

  4. PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora

    PC Laptop Batteries

    An easy fix for a big power boost.

    Comprar agora
  5. Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.
    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

  6. Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.
    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

  7. Carefully remove the motherboard and white plastic piece from the case.
    • Carefully remove the motherboard and white plastic piece from the case.

  8. Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket. Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.
    • Remove the larger ribbon cable from the daughter board by lifting the black latch and pulling the ribbon cable gently from the socket.

    • Disconnect the smaller ribbon cable leading from the white plastic piece by simply pulling it from the socket.

  9. Separate the white plastic piece from the motherboard. Separate the white plastic piece from the motherboard.
    • Separate the white plastic piece from the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Zoe Tuggle

Membro desde: 01-04-2015

161 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 12-2, Lancaster Spring 2015 Membro de Cal Poly, Team 12-2, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G2

4 Membros

12 Guias de autoria

So after doing all theses steps did it resolve the problem

Anita - Responder

Thanks so much I really needed this guide.

Thanks, Sam

Sam Liam Matthews - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 15

Últimos 30 dias: 91

Todo: 5,536