Ir para o conteúdo principal

GoPro Hero Casing Replacement

Pré-requisito somente
Este guia destina-se apenas a ser usado como pré-requisito para outros guias. É incompleto por si só.

O que você precisa

  1. GoPro Hero Casing Replacement, Casing: passo 1, imagem 1 %32
    • Power off your GoPro before beginning disassembly.

    • Unclip the black latch to the camera case and open the case.

  2. GoPro Hero Casing Replacement: passo 2, imagem 1 %32
    • Gently pry the back open by inserting a metal spudger between the case and back panel.

  3. GoPro Hero Casing Replacement: passo 3, imagem 1 %32
    • Disconnect the battery from the motherboard by unplugging the red, white, and black wires from the white adapter.

  4. GoPro Hero Casing Replacement: passo 4, imagem 1 %32
    • Disconnect the ribbon cable from the lens by lifting the black latch and gently pulling the ribbon cable from the socket.

  5. GoPro Hero Casing Replacement: passo 5, imagem 1 %32
    • Use a Phillips screwdriver (PH000) to remove the four screws around the white plastic piece.

    • Make sure to keep track of these screws as they are very small.

  6. GoPro Hero Casing Replacement: passo 6, imagem 1 %32
    • Carefully remove the motherboard and white plastic piece from the case.

Conclusão

To reassemble your device, follow these instructions in reverse order.

River Drake

Membro desde: 04/02/15

1.023 Reputação

Autoria de 5 guias

Equipe

Cal Poly, Team 12-2, Lancaster Spring 2015 Membro de Cal Poly, Team 12-2, Lancaster Spring 2015

CPSU-LANCASTER-S15S12G2

Membros da 4

Autoria de 18 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 124