Ir para o conteúdo principal

General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement

O que você precisa

  1. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement, Reverse Switch: passo 1, imagem 1 %32
    • Before you begin, make sure the drain cleaner is disconnected from power.

    • Use a Phillips #2 driver to remove the two screws securing the control box cover.

  2. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 2, imagem 1 %32
    • Remove the control box cover.

  3. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 3, imagem 1 %32
    • Use a 9/16 inch deep socket and ratchet to remove the nut securing the reverse switch.

  4. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 4, imagem 1 %32
    • Remove the reverse switch guard.

  5. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 5, imagem 1 %32 General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 5, imagem 2 %32
    • Squeeze the tabs on either side of the reverse switch connector.

    • Pull the two halves of the connector apart to disconnect it.

    • Take note of where everything is connected in the control box before disconnecting anything else.

  6. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 6, imagem 1 %32 General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 6, imagem 2 %32
    • Pull the white cable straight off of its spade connector on the power switch diaphragm.

  7. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 7, imagem 1 %32 General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 7, imagem 2 %32
    • Pull the black cable straight off of its spade connector on the power switch diaphragm.

  8. General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 8, imagem 1 %32 General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 8, imagem 2 %32 General Pipe Cleaners Drain Cleaner PMEBO 2016 Reverse Switch Replacement: passo 8, imagem 3 %32
    • Slide the switch assembly down out of its hole in the control box and pull it out of the control box.

    • Be careful not to snag the switch on any cables during removal.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Adam O'Camb

Membro desde: 04/11/15

195.355 Reputação

Autoria de 416 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 13

Duração total: 506