Ir para o conteúdo principal

Gateway SA1 Wireless Card Replacement

O que você precisa

  1. Gateway SA1 Wireless Card Replacement, Wireless Card: passo 1, imagem 1 %32
    • The first thing you need to do is remove the panel concealing the wireless card, by taking out the screws.

  2. Gateway SA1 Wireless Card Replacement: passo 2, imagem 1 %32
    • Locate the wireless card on the right side of the now removed panel.

  3. Gateway SA1 Wireless Card Replacement: passo 3, imagem 1 %32
    • Remove the screws in the two possible locations.

  4. Gateway SA1 Wireless Card Replacement: passo 4, imagem 1 %32
    • After removing the screws, gently pull upwards on the end of the wireless card until it is angled as shown.

  5. Gateway SA1 Wireless Card Replacement: passo 5, imagem 1 %32
    • Pull the card diretly outward from its socket, all while being mindful of the connected wires.

    • Remove the wired connections by gently pulling them diretly away from the card. Please remember where each one was connected, it will be useful for reconnecting

    • Reconnect wires to new wireless card and screw back into place.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Shawn Cabral

Membro desde: 03/12/14

463 Reputação

Autoria de 4 guias

Equipe

UMass Dartmouth, Team 5-4, Cichon Spring 2014 Membro de UMass Dartmouth, Team 5-4, Cichon Spring 2014

UMASSD-CICHON-S14S5G4

Membros da 3

Autoria de 8 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 4

Duração total: 649