Conserte seus objetos

Direito de executar reparos

Loja

Gateway SA1 RAM Replacement

Escrito Por: Diego Carteno (e 5 outros contribuidores)
  • Comentários: 0
  • Favoritos: 3
  • Execuções: 3

Dificuldade

Moderado

Passos

6

Tempo necessário

5 minutos

Partes

2

Sinalizadores

0

Introdução

Installing upgraded memory.

  1. Move the latch to the right of the battery to unlock.

    • Move the latch to the right of the battery to unlock.

    Editar

  2. Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • Slide the latch on the left directly below the battery to unlock and pull out the battery as shown.

    • The latch must be held in position to remove the battery.

    Editar

  4. Loosen the indicated Philips screw that connects the memory bay cover to the casing. The indicated Philips screw does not come out of the cover.

    • Loosen the indicated Philips screw that connects the memory bay cover to the casing.

    • The indicated Philips screw does not come out of the cover.

    Editar

  5. Lift and remove the cover using the spudger. Lift and remove the cover using the spudger.

    • Lift and remove the cover using the spudger.

    Editar

  6. Gently press the clip outwards. The module will tilt up and can be pulled out of the slot.

    • Gently press the clip outwards.

    • The module will tilt up and can be pulled out of the slot.

    • There may be another memory module underneath so be sure to remove both.

    Editar

  7. To insert a new memory, slide the module into the slot at a 30 to 45 degree angle.

    • To insert a new memory, slide the module into the slot at a 30 to 45 degree angle.

    • Place the first module into the bottom slot then the next module into the top slot.

    • These slots are keyed so verify that you are sliding the module in one direction.

    • Verify that the new memory modules are designed for your specific Gateway Laptop.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

3 outras pessoas concluíram este guia.

Autor

com 5 outros contribuidores

Diego Carteno

Membro desde: 15/04/2010

258 Reputação

7 Guias de autoria

Emblemas: 14

+11 outros emblemas

Equipe

Cal Poly, Team 24-20, Regan Spring 2010 Membro de Cal Poly, Team 24-20, Regan Spring 2010

CPSU-REGAN-S10S24G20

4 Membros

14 Guias de autoria

0 comentários

Adicionar um comentário

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 18

Duração total: 5,088