Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Remove the five identical 3/16" Phillips screws that secures the hard drive and memory cover using a Phillips #0 Screwdriver.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Lift up the base cover from the the top with your hands to a 90 degree angle.
-
Remove the base cover and place it in a safe and dry place.
-
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.