Introdução

The RAM can be replaced if you have a Phillips #0 screwdriver.

Peças

Não são necessárias peças.

  1. Unlock the tab located in the top left corner of the netbook.
    • Unlock the tab located in the top left corner of the netbook.

    • The red tab indicated that the battery has been properly unlocked.

    • Remove the battery.

    • When working with electronics, it is always wise to remove the power source before taking the device apart.

    Adicionar comentário

  2. The RAM is located under this cover.
    • The RAM is located under this cover.

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Using a Phillips #0 screwdriver, remove one (1) 5mm screw holding the cover in place.

    • Use a plastic opening tool to remove the cover.

    Adicionar comentário

    • Unlock the RAM by pinching the metal clamps that keep the RAM in place.

    • Remove the RAM while the metal clamps are disengaged.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Lydia Benjock

Member since: 18-10-2013

1.189 reputação

10 Guides authored

Equipe

Clemson, Team 14-3, Benson Fall 2013 Membro de Clemson, Team 14-3, Benson Fall 2013

CLEM-BENSON-F13S14G3

3 Membros

22 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 2

Últimos 30 dias: 7

Todo: 1,628