Ir para o conteúdo principal

Gateway 600YG2 LCD Replacement

O que você precisa

  1. Gateway 600YG2 LCD Replacement, Battery: passo 1, imagem 1 %32
    • Flip the laptop over.

    • Slide the battery release tab to the right with your index finger to open the battery cover.

  2. Gateway 600YG2 LCD Replacement: passo 2, imagem 1 %32
    • Remove the battery cover using the tab on the right side.

    • Take the battery out with your index finger.

  3. Gateway 600YG2 LCD Replacement, Power Button Panel: passo 3, imagem 1 %32
    • Insert the spudger between the "sysrq" and "ins" keys.

    • Gently pry free the power button panel above the keyboard, beginning from the right and moving to the left.

  4. Gateway 600YG2 LCD Replacement, LCD: passo 4, imagem 1 %32
    • Remove the five screws with a Phillips #0 screwdriver.

    • The LCD hinge covers are held in place by four screws. One screw is for grounding the LCD.

    • Lift the hinge covers along the outer edges with the spudger until they are released.

  5. Gateway 600YG2 LCD Replacement: passo 5, imagem 1 %32
    • Gently unplug the LCD from the system board.

  6. Gateway 600YG2 LCD Replacement: passo 6, imagem 1 %32
    • Using the Phillips #0 screwdriver, remove six screws that hold the LCD to the hinge.

  7. Gateway 600YG2 LCD Replacement: passo 7, imagem 1 %32
    • Check if any cables are still connected before pulling out the LCD.

    • Remove the cable by gently pulling it out while holding down the LCD.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Elizabeth Mazer

Membro desde: 10/14/10

78 Reputação

Autoria de 10 guias

Equipe

Cal Poly, Team 20-10, Maness Fall 2010 Membro de Cal Poly, Team 20-10, Maness Fall 2010

CPSU-MANESS-F10S20G10

Membros da 3

Autoria de 22 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 1

Duração total: 1,871