Ir para o conteúdo principal

Peças

Nenhum componente especificado.

  1. Pull back the barcode located on the back of the device.
    • Pull back the barcode located on the back of the device.

  2. Unscrew the two screws located underneath the barcode.
    • Unscrew the two screws located underneath the barcode.

  3. Use the pic to prop open the device on all four sides.
    • Use the pic to prop open the device on all four sides.

    • There are clips located on the inside of the device. Be careful when inserting the pic into the device.

  4. Be sure to remove the On and OFF switch. Open the device gently to make sure not to lose the clip.
    • Be sure to remove the On and OFF switch.

    • Open the device gently to make sure not to lose the clip.

  5. Remove the tape that is holding down the wires carefully/slowly. Remove the tape that is holding down the wires carefully/slowly.
    • Remove the tape that is holding down the wires carefully/slowly.

  6. Remove all four screws  on the mother board with a T5 screw. Remove all four screws  on the mother board with a T5 screw.
    • Remove all four screws on the mother board with a T5 screw.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Nicholas Salinas

Membro desde: 10-10-2016

123 Reputation

Autoria de 1 guia

Team

Texas Tech, Team 6-4, Bennett Fall 2016 Membro de Texas Tech, Team 6-4, Bennett Fall 2016

TTU-BENNETT-F16S6G4

4 Membros

4 Guias de autoria

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 58