Introdução

In this guide the repairer replaces the speaker of the device by disassembling the device further to expose the motherboard and speaker.

Prerequisite Guide:

Disassembling Garmin Nuvi 370 Into Core Components

Tools Used:

  • Fine Point Tweezers
  • Spudger

Estimated Duration: 10 minutes

Peças

Não são necessárias peças.

  1. After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.
    • After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.

    Adicionar comentário

  2. Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.
    • Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.

    Adicionar comentário

    • The motherboard will now freely separate from the back casing; lay it flat next to the housing.

    Adicionar comentário

    • Detach blue speaker cable from motherboard.

      • Battery cable is detached in this picture, and it is not required to do so to install a new speaker.

    Adicionar comentário

    • Detach speaker from casing and insert new, functional speaker.

      • Battery is removed in the picture and is not required for the installation of a new speaker.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Matt West

Member since: 18-04-2013

22 reputação

4 Guides authored

Equipe

Cal Poly, Team 13-65, Johann Spring 2013 Membro de Cal Poly, Team 13-65, Johann Spring 2013

CPSU-JOHANN-S13S13G65

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 246