Introdução

The screen is a vital component to a digital smart watch. With the right tools, replacing the screen can be done efficiently and effectively.

Power off your watch before disassembling it.
  • Power off your watch before disassembling it.

  • Place the watch on a hard surface with the screen facing down.

  • Unscrew the four 7.0 mm screws located at each corner using a T5 screwdriver.

Adicionar comentário

Pry the old battery out using a plastic spudger.
  • Pry the old battery out using a plastic spudger.

Adicionar comentário

  • Unscrew the two T4 6 mm screws located on both sides of the motherboard.

Adicionar comentário

  • Lift the motherboard up using a plastic spudger.

    • Ribbon cables are still attached underneath—be careful when prying the motherboard up.

Adicionar comentário

  • Flip the ZIF connectors using a plastic spudger tool.

  • Remove the motherboard.

Adicionar comentário

  • Remove gold piece in the corner using the pointed side of the 4 spudger.

  • Any spudger with a pointed end should work to remove this piece.

Adicionar comentário

  • Pry the screen up with a plastic opening tool.

  • Any plastic tool with a flat edge should work to remove the screen.

  • Remove the screen.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Suzanne Drumm

Member since: 21-03-2018

85 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S5-G3, Baechle Spring 2018 Membro de IUPUI, Team S5-G3, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G3

3 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 5

Últimos 30 dias: 17

Todo: 96