Introdução

The motherboard is an essential component of any electronic device. Always use caution when working on these components.

  1. Power off your watch before disassembling it.
    • Power off your watch before disassembling it.

    • Place the watch on a hard surface with the screen facing down.

    • Unscrew the four 7.0 mm screws located at each corner using a T5 screwdriver.

  2. Pry the old battery out using a plastic spudger.
    • Pry the old battery out using a plastic spudger.

  3. Free shipping on all orders over US$100 or containing a Pro Tech Toolkit!

    Visite Nossa Loja
  4. Unscrew the two T4 6 mm screws located on both sides of the motherboard.
    • Unscrew the two T4 6 mm screws located on both sides of the motherboard.

  5. Lift the motherboard up using a plastic spudger.
    • Lift the motherboard up using a plastic spudger.

    • Ribbon cables are still attached underneath—be careful when prying the motherboard up.

  6. Flip the ZIF connectors using a plastic spudger tool.
    • Flip the ZIF connectors using a plastic spudger tool.

    • Remove the motherboard.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Dustin Persohn

Member since: 21-03-2018

208 reputação

2 Guides authored

Equipe

IUPUI, Team S5-G3, Baechle Spring 2018 Membro de IUPUI, Team S5-G3, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G3

3 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 9

Todo: 155