Introdução

This guide will give you all the necessary steps to change your old motherboard for a new one.

Remove the five 7mm screws with H1.3 hex screwdriver.
  • Remove the five 7mm screws with H1.3 hex screwdriver.

Adicionar comentário

Use a plastic opening tool to remove the face of the device to expose the inner components.
  • Use a plastic opening tool to remove the face of the device to expose the inner components.

    • There is one metal piece at the top of the face that is loose. This is the GPS antenna which will need to be removed as well.

    • Be careful of the ribbon that connects the motherboard to the display.

Adicionar comentário

  • Disconnect this ribbon from the motherboard using tweezers.

Adicionar comentário

  • Using a T5 screwdriver, remove the two 5mm screws.

    • The motherboard should move freely.

Adicionar comentário

  • Another ribbon is attached from the underside of the motherboard. Disconnect this ribbon.

Adicionar comentário

  • Disconnect wires connecting battery to motherboard.

Adicionar comentário

  • The battery is glued to the motherboard and will need pried off with a nylon spudger.

Adicionar comentário

  • Now attach battery to new motherboard and reassemble.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jacob Smiley

Member since: 26-03-2018

157 reputação

Autoria de 1 guia

Equipe

IUPUI, Team S1-G6, Harley Spring 2018 Membro de IUPUI, Team S1-G6, Harley Spring 2018

IUPUI-HARLEY-S18S1G6

3 Membros

2 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 21

Últimos 30 dias: 115

Todo: 443