Ir para o conteúdo principal

Garmin Fenix 3 GPS Antenna Replacement

O que você precisa

  1. Garmin Fenix 3 GPS Antenna Replacement, Display Assembly: passo 1, imagem 1 %32 Garmin Fenix 3 GPS Antenna Replacement, Display Assembly: passo 1, imagem 2 %32
    • Use a T6 screwdriver to remove the five 1.7 mm screws from the watch face.

  2. Garmin Fenix 3 GPS Antenna Replacement: passo 2, imagem 1 %32
    • Carefully lift the face off the watch base.

    • Do not yank the face. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon.

  3. Garmin Fenix 3 GPS Antenna Replacement: passo 3, imagem 1 %32
    • Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard.

  4. Garmin Fenix 3 GPS Antenna Replacement: passo 4, imagem 1 %32
    • Set the watch face aside.

  5. Garmin Fenix 3 GPS Antenna Replacement, GPS Antenna: passo 5, imagem 1 %32
    • Locate the antenna, which is located on the motherboard.

  6. Garmin Fenix 3 GPS Antenna Replacement: passo 6, imagem 1 %32
    • Carefully remove the antenna, and set it aside.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

8 comentários

Hi, where did you get a replacement Antenna?`I have a Fenix 3 with no GPS reception at all..

Regards, Nico

Nico Baumgartner - Responder

Same as you…

X PuyA -

Hi, where did you get a replacement Antenna? I have a Fenix 3 with no GPS reception at all..

Regards, Dusan

dusan.kosobud - Responder

Hi did you find gps antenna

Abdessamad Faroque - Responder

Could you please add a link where to buy the antenna?

marco475 - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 17

Últimos 30 dias: 62

Duração total: 5,464