Introdução

In this guide there are delicate parts that will very easily break under tension. Keep this in mind as your move forwards.

Peças

Não são necessárias peças.

  1. Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.
    • Remove the six T5 Torx 6.32mm screws securing the back cover to the watch.

    Adicionar comentário

  2. Remove the back cover carefully.
    • Remove the back cover carefully.

    • Even after the screws have been removed, the back cover can still be quite difficult to take off. Moderate to extensive prying may be required. Be gentle, but firm.

    Adicionar comentário

    • Remove the orange gasket.

    Adicionar comentário

    • Remove the screen and motherboard assembly from the case.

    Adicionar comentário

    • Use a metal spudger to remove the golden retaining clip from the screen. There will be some adhesive to break.

    Adicionar comentário

    • Remove the screen from the golden metal clip.

    Adicionar comentário

    • Unhinge the black retaining hinge by prying it open with the metal spudger; Your fingernails will work as well.

    Adicionar comentário

    • Remove the connector from the motherboard by pulling it free at the base.

    • Make sure to pull from the base of the connector wire, as it is very easy to rip the wire from the screen.

    Adicionar comentário

    • Remove the screen from the motherboard.

    • Notice our tape retaining the connector to the screen. This is so easy to rip!

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Evan Miller

Member since: 21-03-2018

205 reputação

2 Guides authored

Equipe

IUPUI, Team S4-G1, Baechle Spring 2018 Membro de IUPUI, Team S4-G1, Baechle Spring 2018

IUPUI-BAECHLE-S18S4G1

3 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 75