Ir para o conteúdo principal

Este guia tem alterações mais recentes. Mudar para a última versão não verificada.

Game Boy Micro Battery Cover Replacement

O que você precisa

  1. Game Boy Micro Battery Cover Replacement, Battery Cover: passo 1, imagem 1 %32 Game Boy Micro Battery Cover Replacement, Battery Cover: passo 1, imagem 2 %32 Game Boy Micro Battery Cover Replacement, Battery Cover: passo 1, imagem 3 %32
    • Remove the Phillips #00 screw on the side of the Game Boy closest to the directional pad.

    • Once the screw has been loosened, lift the cover off the back of the device.

  2. Game Boy Micro Battery Cover Replacement: passo 2, imagem 1 %32 Game Boy Micro Battery Cover Replacement: passo 2, imagem 2 %32 Game Boy Micro Battery Cover Replacement: passo 2, imagem 3 %32
    • Once the back cover is removed, you should see that the battery is connected to the device by two wires and a plastic connector.

    • Gently grab the wires.

  3. Game Boy Micro Battery Cover Replacement: passo 3, imagem 1 %32 Game Boy Micro Battery Cover Replacement: passo 3, imagem 2 %32
    • Carefully pull the wires until the connector comes out of the device.

    • Be careful! Don't pull too hard, or you may rip the wires out from the connector.

    • When putting the battery back into the device, make sure the connector is put in exactly the way it came out.

Conclusão

To reassemble your device, follow these instructions in reverse order.

12 outras pessoas executaram este guia.

Jack

Membro desde: 01/21/10

396 Reputação

Autoria de 3 guias

Equipe

Cal Poly, Team 8-46, Regan Winter 2010 Membro de Cal Poly, Team 8-46, Regan Winter 2010

CPSU-REGAN-W10S8G46

Membros da 5

Autoria de 25 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 18

Últimos 30 dias: 70

Duração total: 15,409