Introdução

A guide on how to take out the many screws located on the inside, metal cover and how to install an LCD.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

Adicionar comentário

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Adicionar comentário

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Adicionar comentário

  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

Adicionar comentário

  • Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

    • Remove the fifteen 2.9 mm Phillips #00 screws.

Adicionar comentário

  • Slide casing out using the spudger.

Adicionar comentário

  • Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Sarah Looper

Member since: 11-03-2013

76 reputação

7 Guides authored

Equipe

Clemson, Team 13-4, Benson Spring 2013 Membro de Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 Membros

8 Guides authored

Great Guide! Worked great to replace my screen!

Daniel - Responder

Awesome guide! BEST WORK I'VE EVER SEEN ON A REPAIR GUIDE

Johnston Thayer - Responder

Shutter button replacement was great too!

Daniel -

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Todo: 637