Introdução

The flash battery provides the power necessary to create the flash. This guide describes how to find and remove this battery in order to install a new one.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

Adicionar comentário

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Adicionar comentário

Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.
  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Adicionar comentário

Separate the front and back casing using the spudger. Gently pull apart the two casings. Pull the back casing away from the camera.
  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

Adicionar comentário

Remove screws from motherboard using the Phillips 00 screwdriver.
  • Remove screws from motherboard using the Phillips 00 screwdriver.

    • Two 2.5 mm widehead Phillips screws

    • One 3.3 mm #00 Phillips screws

    • Three 2.5 mm #00 Phillips screws (black screws)

Adicionar comentário

Rotate the front cover clockwise onto its side and remove the single screw on the side using a Phillips 00 screwdriver.
  • Rotate the front cover clockwise onto its side and remove the single screw on the side using a Phillips 00 screwdriver.

    • Remove 3.3 mm #00 Phillips screw from the side of the front screen.

Adicionar comentário

Firmly grasp both the motherboard and front cover. Slowly pull the front cover away from the motherboard. Do not be alarmed if it takes substantial pressure to separate the two.
  • Firmly grasp both the motherboard and front cover. Slowly pull the front cover away from the motherboard.

    • Do not be alarmed if it takes substantial pressure to separate the two.

Adicionar comentário

Gently remove battery from casing. Gently remove battery from casing. Gently remove battery from casing.
  • Gently remove battery from casing.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Sarah Looper

Member since: 11-03-2013

76 reputação

7 Guides authored

Equipe

Clemson, Team 13-4, Benson Spring 2013 Membro de Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 Membros

8 Guides authored

What is the battery number so you can have a replacement ready?

attic77 - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 342