Conserte seus objetos Comunidade Loja

Fujifilm FinePix S8200 LCD Screen Replacement

Introdução

Lots of things could cause your LCD screen to need replacing. Here's how to do it.

O que você precisa

  1. Fujifilm FinePix S8200 LCD Screen Replacement, Batteries: passo 1, imagem 1 %32

    • Turn the camera upside down so you can access the battery chamber.

    • Make sure that the camera is powered off before opening the battery chamber. Not doing so could damage your memory card.

    Editar

  2. Fujifilm FinePix S8200 LCD Screen Replacement: passo 2, imagem 1 %32

    • Push the battery chamber latch in the direction of the front of the camera. Keeping tension on the latch, slide the battery chamber cover toward the outside of the camera, opening the battery chamber.

    Editar

  3. Fujifilm FinePix S8200 LCD Screen Replacement: passo 3, imagem 1 %32

    • With the battery chamber open, remove the old batteries.

    • When replacing the batteries, remember that the battery orientation is shown by the + and - marks. Each mark indicates which side of the battery faces up in the chamber.

    Editar

  5. Fujifilm FinePix S8200 LCD Screen Replacement, Rear Housing Cover: passo 4, imagem 1 %32 Fujifilm FinePix S8200 LCD Screen Replacement, Rear Housing Cover: passo 4, imagem 2 %32 Fujifilm FinePix S8200 LCD Screen Replacement, Rear Housing Cover: passo 4, imagem 3 %32

    • Remove the 4mm JIS #00 screws from the sides and bottom of the camera.

    Editar

  6. Fujifilm FinePix S8200 LCD Screen Replacement: passo 5, imagem 1 %32 Fujifilm FinePix S8200 LCD Screen Replacement: passo 5, imagem 2 %32 Fujifilm FinePix S8200 LCD Screen Replacement: passo 5, imagem 3 %32

    • Carefully pry away the rear housing cover with the plastic opening tool.

    Editar

  7. Fujifilm FinePix S8200 LCD Screen Replacement: passo 6, imagem 1 %32

    • Remove the rear housing cover by carefully pulling it away from the camera.

    Editar

  8. Fujifilm FinePix S8200 LCD Screen Replacement, LCD Screen: passo 7, imagem 1 %32 Fujifilm FinePix S8200 LCD Screen Replacement, LCD Screen: passo 7, imagem 2 %32

    • Fold back the LCD screen with the plastic opening tool.

    • Remove the cable coming from the LCD screen that goes into the motherboard.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Joseph Kelley

Membro desde: 01/15/15

228 Reputação

Autoria de 2 guias

Emblemas: 6

+3 outros emblemas

Equipe

USF Tampa, Team 7-1, Remmell Winter 2015 Membro de USF Tampa, Team 7-1, Remmell Winter 2015

USFT-REMMELL-W15S7G1

Membros da 4

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 1

Duração total: 1,282