Introdução

Use this guide to replace the battery door.

Peças

Não são necessárias peças.

  1. Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.
    • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

    Adicionar comentário

  2. Locate the battery door.
    • Locate the battery door.

    Adicionar comentário

    • Locate the latch on the battery door.

    • Use your finger pry to it open where it says "BATT."

    Adicionar comentário

  3. Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    Spread Fixmas Cheer
    Get $12 off your purchase of $50 or more with code FIXMAS12
    • Remove the battery from the camera by pulling the battery door outward.

    Adicionar comentário

    • Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.

    Adicionar comentário

    • Squeeze the camera placing a thumb on the tab marked CE.

    • Pull the back half of the camera firmly away from the camera body.

    Adicionar comentário

    • Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver.

    • The plastic strip will now come off the camera body.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Eric Nicolai

Member since: 10-01-2011

679 reputação

6 Guides authored

Equipe

Cal Poly, Team 13-5, Forte Winter 2011 Membro de Cal Poly, Team 13-5, Forte Winter 2011

CPSU-FORTE-W11S13G5

5 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Todo: 1,643