Ir para o conteúdo principal

Fugoo Tough Device Speaker cover/Shell Replacement

O que você precisa

  1. Fugoo Tough Device Speaker cover/Shell Replacement, Device Speaker/Shell: passo 1, imagem 1 %32 Fugoo Tough Device Speaker cover/Shell Replacement, Device Speaker/Shell: passo 1, imagem 2 %32
    • Begin by unscrewing the four 10.72mm corner screws using the Hex 2.0 screwdriver.

  2. Fugoo Tough Device Speaker cover/Shell Replacement: passo 2, imagem 1 %32
    • Using the Hex 1.5 screwdriver remove remaining 6-5.79mm screws on the front of the speaker.

  3. Fugoo Tough Device Speaker cover/Shell Replacement: passo 3, imagem 1 %32
    • Pull front part of shell away from back part of shell.

Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 2

Duração total: 224