Ir para o conteúdo principal

Fossil Q Marshal Gen 2 Battery Replacement

O que você precisa

  1. Fossil Q Marshal Gen 2 Battery Replacement, Back Cover: passo 1, imagem 1 %32
    • Squeeze retaining pins together to release chain from watch body. This can be done by hand or with tweezers.

    • Remove chain from opposing side of watch body.

  2. Fossil Q Marshal Gen 2 Battery Replacement: passo 2, imagem 1 %32
    • Use tweezers to grip the notches on the back cover, then unscrew the back cover (counter-clockwise) from the watch housing.

    • There is an actual tool made to remove this back cover, using the right tool may save you from scratching the back of watch with tweezers. The backcover tool can be purchased online, a local jeweler may also be willing to remove it for you.

  3. Fossil Q Marshal Gen 2 Battery Replacement: passo 3, imagem 1 %32 Fossil Q Marshal Gen 2 Battery Replacement: passo 3, imagem 2 %32
    • Utilize tweezers or a spudger or your fingers to pull the black wire connector from the motherboard.

    • Utilize a spudger to pull the orange connector off of the motherboard.

  4. Fossil Q Marshal Gen 2 Battery Replacement: passo 4, imagem 1 %32
    • Utilize tweezers to pull the white battery connector from the motherboard.

  5. Fossil Q Marshal Gen 2 Battery Replacement: passo 5, imagem 1 %32 Fossil Q Marshal Gen 2 Battery Replacement: passo 5, imagem 2 %32 Fossil Q Marshal Gen 2 Battery Replacement: passo 5, imagem 3 %32
    • The internal electronics can now be pulled out of the watch as one unit leaving the screen remaining in the watch housing.

    • Taking the flat end of the spudger, pry it up.

  6. Fossil Q Marshal Gen 2 Battery Replacement, Battery: passo 6, imagem 1 %32
    • The battery is secured to the back of the motherboard utilizing a sticky pad. Gently separate the battery from the board while making sure not to put too much stress on the board. This is best done at the location shown.

  7. Fossil Q Marshal Gen 2 Battery Replacement: passo 7, imagem 1 %32 Fossil Q Marshal Gen 2 Battery Replacement: passo 7, imagem 2 %32
    • Remove battery from plastic housing.

    • Slip wires through large slot in plastic housing to completely remove.

Conclusão

To reassemble your device, follow these instructions in reverse order.

16 outras pessoas executaram este guia.

Clay Walker

Membro desde: 11/07/17

752 Reputação

Autoria de 1 guia

Equipe

IUPUI, Team S2-G5, Harley Fall 2017 Membro de IUPUI, Team S2-G5, Harley Fall 2017

IUPUI-HARLEY-F17S2G5

Membros da 3

Autoria de 6 guias

13 comentários

I have read your awesome guide. This is really helpful.

https://powerbank-online.com/reviews/bat...

Ellen Sam - Responder

thank you, i did it. But now what. i have no idea where to buy the spare part. hahaha. Help Me :(

Rafael “Satriabhi” Atheya - Responder

I have the exact same battery I need to replace. easy to take out but where do I get the replacement battery??

dustykeith17 - Responder

Help! I can’t find a replacement battery.

Pedro Pimentel - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 10

Últimos 7 dias: 80

Últimos 30 dias: 347

Duração total: 40,677