Conserte seus objetos Comunidade Loja

Flip Video Ultra Camera lense Replacement

Introdução

This replacement guide will walk you through on how to remove the camera lens. The tools needed are the Phillips #1 Screwdriver and Tweezers. It should roughly take about 15 minutes.

O que você precisa

  1. Flip Video Ultra Camera lense Replacement, Circuit Board: passo 1, imagem 1 %32

    • Unlock the battery cover by sliding the switch to the unlock position.

    Editar

  2. Flip Video Ultra Camera lense Replacement: passo 2, imagem 1 %32

    • Remove the battery cover by sliding it down the camera.

    Editar

  3. Flip Video Ultra Camera lense Replacement: passo 3, imagem 1 %32

    • Remove the batteries

    Editar

  4. Flip Video Ultra Camera lense Replacement: passo 4, imagem 1 %32

    • Slide the black upper casing off from the device.

    Editar

  5. Flip Video Ultra Camera lense Replacement: passo 5, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 5, imagem 2 %32

    • Remove the six 1mm screws from the back and upper casing with the Phillips Head screwdriver.

    Editar

  6. Flip Video Ultra Camera lense Replacement: passo 6, imagem 1 %32

    • Remove the top casing from the bottom to reveal the inner circuit board.

    Editar

  8. Flip Video Ultra Camera lense Replacement: passo 7, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 7, imagem 2 %32

    • When removing the back panel, the rubber buttons will become loose and likely fall off the board. This is normal and can easily placed back on the board once finished.

    • Remove the six 1mm screws with the 1 Phillips head screwdriver.

    Editar

  9. Flip Video Ultra Camera lense Replacement: passo 8, imagem 1 %32

    • Gently separate the circuit board from the casing.

    Editar

  10. Flip Video Ultra Camera lense Replacement: passo 9, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 9, imagem 2 %32

    • Unscrew the single 1mm screw from USB housing unit.

    Editar

  11. Flip Video Ultra Camera lense Replacement: passo 10, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 10, imagem 2 %32

    • Unscrew the 2 1mm screws and gently separate camera wires from plastic casing.

    Editar

  12. Flip Video Ultra Camera lense Replacement: passo 11, imagem 1 %32

    • Gently pry out the USB housing unit with the Ifxit Opening Tool.

    Editar

  13. Flip Video Ultra Camera lense Replacement: passo 12, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 12, imagem 2 %32 Flip Video Ultra Camera lense Replacement: passo 12, imagem 3 %32

    • Remove the two 1mm screws and separate the circuit board and camera from the plastic casing.

    Editar

  14. Flip Video Ultra Camera lense Replacement: passo 13, imagem 1 %32

    • Unscrew the camera housing unit from the plastic case.

    Editar

  15. Flip Video Ultra Camera lense Replacement: passo 14, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 14, imagem 2 %32 Flip Video Ultra Camera lense Replacement: passo 14, imagem 3 %32
    Ferramenta utilizada nesse passo:
    Tweezers
    $4.99
    Comprar

    • With tweezers, remove the microphone and USB connections.

    Editar

  16. Flip Video Ultra Camera lense Replacement: passo 15, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 15, imagem 2 %32

    • Unscrew the two 1mm screws from the board shown. Remove screen from circuit board.

    Editar

  17. Flip Video Ultra Camera lense Replacement: passo 16, imagem 1 %32 Flip Video Ultra Camera lense Replacement: passo 16, imagem 2 %32

    • Remove the single 2.1 mm screw and separate camera from the circuit board.

    Editar

  18. Flip Video Ultra Camera lense Replacement, Camera lense: passo 17, imagem 1 %32

    • Camera lens is now separated from the circuit board.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 2 outros contribuidores

Nathaniel Ruf

Membro desde: 10/18/16

514 Reputação

Autoria de 5 guias

Emblemas: 5

+2 outros emblemas

Equipe

UMass Dartmouth, Team 5-7, Martin Fall 2016 Membro de UMass Dartmouth, Team 5-7, Martin Fall 2016

UMASSD-MARTIN-F16S5G7

Membros da 3

Autoria de 10 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 7

Duração total: 211