Conserte seus objetos Comunidade Loja

Flash and re-install the firmware of TCA Yoke

Introdução

Guide on how to re-install the firmware, if it became corrupted and the TCA Yoke is not powering on.

O que você precisa

    • Download and install the driver package from here.

    • TCA Yoke and TCA Quadrant both use the same driver.

    Editar

    • Press on the Windows button and type "Firmware Update" into the search.

    Editar

    • Unplug your TCA Yoke from USB port if you already have it plugged-in

    Editar

  5. Flash and re-install the firmware of TCA Yoke, Press and hold the XBOX button: passo 4, imagem 1 %32

    • Press and hold the Xbox button.

    • Make sure to set your Yoke into PC mode, using the switch at the back, before proceeding to the next step.

    Editar

  6. Flash and re-install the firmware of TCA Yoke, Connect to USB while holding the Xbox button: passo 5, imagem 1 %32

    • Keep holding the Xbox button and connect the Yoke to USB port.

    • Once connected, wait a few seconds and let go of the button.

    Editar

    • Your TCA Yoke should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

    Editar
Linha de Chegada

Autor(a)

com 1 outro colaborador

Formica Fusca

Membro desde: 08/01/24

2.595 Reputação

Autoria de 15 guias

Emblemas: 13

+10 outros emblemas

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 1

Últimos 7 dias: 9

Últimos 30 dias: 36

Ao todo: 314