Conserte seus objetos Comunidade Loja

Flash and re-install the firmware of TCA Quadrant

Introdução

Guide on how to re-install the firmware, if it became corrupted and the TCA Quadrant is not being recognized.

    • Download and install the driver package from here.

    • TCA Yoke and TCA Quadrant both use the same driver.

    Editar

    • Press on the Windows button and type "Firmware Update" into the search.

    Editar

    • Unplug your TCA Quadrant from USB port if you already have it plugged-in.

    Editar

  5. Flash and re-install the firmware of TCA Quadrant, Press and hold the indicated button: passo 4, imagem 1 %32

    • Press and hold the button highlighted on the picture.

    Editar

  6. Flash and re-install the firmware of TCA Quadrant, Connect to PC while holding the button: passo 5, imagem 1 %32

    • Keep holding the button and connect the Quadrant to USB port of your PC.

    • Once connected, wait a few seconds and let go of the button.

    • You must connect directly to USB port of your PC. It will not work if you connect it to USB port of your Yoke.

    Editar

    • Your TCA Quadrant should show up in Firmware Updater.

    • Press OK on the Firmware Updater and wait for update to complete.

    Editar
Linha de Chegada

Autor(a)

com 1 outro colaborador

Formica Fusca

Membro desde: 08/01/24

2.595 Reputação

Autoria de 15 guias

Emblemas: 13

+10 outros emblemas

0Comentários do guia

Comentar

Visualizações:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 15

Ao todo: 193