Conserte seus objetos Comunidade Loja

Fixing a Rusted Measuring Tape

Introdução

Use this guide to fix any rusted measuring tape.

Over time measuring tapes tend to rust. It prevents accurate measurements, which can impact your project. This guide illustrates 7 steps to make any rusted measuring tape work accurately again.

O que você precisa

  1. Fixing a Rusted Measuring Tape, Measuring Tape: passo 1, imagem 1 %32

    • Untighten the 9.5 mm Phillips screw with the Phillips screwdriver.

    • Remove the belt clip.

    Editar

  2. Fixing a Rusted Measuring Tape: passo 2, imagem 1 %32

    • Pull the case length off.

    Editar

  4. Fixing a Rusted Measuring Tape: passo 3, imagem 1 %32

    • Untighten the 15.7 mm Phillips screw with the Phillips screwdriver.

    Editar

  5. Fixing a Rusted Measuring Tape: passo 4, imagem 1 %32

    • Open the case with hands.

    Editar

  6. Fixing a Rusted Measuring Tape: passo 5, imagem 1 %32

    • Spray lubricant solution (WD-40) into the spring as indicated.

    Editar

  7. Fixing a Rusted Measuring Tape: passo 6, imagem 1 %32

    • Pull tape in and out to ensure all the lubricant is applied to the spring.

    • Apply lubricant in increments (be gentle and apply slowly).

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 3 outros contribuidores

Miles Kim

Membro desde: 04/25/24

133 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

UC Davis, Team 3-4, Whithaus Spring 2024 Membro de UC Davis, Team 3-4, Whithaus Spring 2024

UCD-WHITHAUS-S24S3G4

Membros da 3

1 Guia de autoria

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 15

Duração total: 64