Conserte seus objetos Comunidade Loja

Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler

Introdução

This guide will teach you how to fix a jammed paper-roll in your Brother PT-90 Label-Maker.

O que você precisa

  1. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 1, imagem 1 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 1, imagem 2 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 1, imagem 3 %32

    • Turn your label-maker on its face. Using your thumb, press in and then upward on the fastener located on the side of your device.

    Editar

  2. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 2, imagem 1 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 2, imagem 2 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 2, imagem 3 %32

    • Remove the batteries from your device.

    Editar

  4. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 3, imagem 1 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 3, imagem 2 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 3, imagem 3 %32

    • Using a plastic opening tool from your iFixit tool kit, leverage the label cartridge out of your device.

    Editar

  5. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 4, imagem 1 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 4, imagem 2 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 4, imagem 3 %32

    • Press the label paper back into alignment with the small holders on the right side of the label cartridge.

    Editar

  6. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 5, imagem 1 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 5, imagem 2 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 5, imagem 3 %32

    • Place the label cartridge and batteries back into your device. Refasten the bottom case of the label-maker.

    Editar

  7. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 6, imagem 1 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 6, imagem 2 %32 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: passo 6, imagem 3 %32

    • Well done! You have successfully corrected the paper-jam in your Brother PT-90 Label-Maker.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

Kaitlyn Abrams

Membro desde: 10/13/16

1 Reputação

Autoria de 1 guia

Emblemas: 2

Equipe

University of Maine, Team 2-1, Diaz Fall 2016 Membro de University of Maine, Team 2-1, Diaz Fall 2016

UMAINE-DIAZ-F16S2G1

Membros da 3

Autoria de 2 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 3

Últimos 30 dias: 6

Duração total: 787