Ir para o conteúdo principal

Fast Fix Box Cutter Blade Replacement

O que você precisa

  1. Fast Fix Box Cutter Blade Replacement, Blade: passo 1, imagem 1 %32 Fast Fix Box Cutter Blade Replacement, Blade: passo 1, imagem 2 %32 Fast Fix Box Cutter Blade Replacement, Blade: passo 1, imagem 3 %32
    • The case screw can easily be removed by using a Stanley #2 screwdriver or any other #2 screwdriver.

  2. Fast Fix Box Cutter Blade Replacement: passo 2, imagem 1 %32
    • Separate casing by simply pulling apart both halves.

  3. Fast Fix Box Cutter Blade Replacement: passo 3, imagem 1 %32 Fast Fix Box Cutter Blade Replacement: passo 3, imagem 2 %32
    • Carefully, using the pull tab, take out the blade holder and set it on the table.

    • Remove the blade by carefully sliding it out of the holder.

    • Be very careful when dealing with the blade as it is sharp.

  4. Fast Fix Box Cutter Blade Replacement: passo 4, imagem 1 %32 Fast Fix Box Cutter Blade Replacement: passo 4, imagem 2 %32
    • Replace the old blade with the new blade by carefully sliding it into the blade holder.

    • Place the blade holder back into the casing using the pull tab to hold it.

    • Be very careful when dealing with the blade as it is sharp.

  5. Fast Fix Box Cutter Blade Replacement: passo 5, imagem 1 %32 Fast Fix Box Cutter Blade Replacement: passo 5, imagem 2 %32
    • Add grease to the sliding mechanism

    • Use either a paper towel or a cloth to spread the grease around the sliding mechanism.

  6. Fast Fix Box Cutter Blade Replacement: passo 6, imagem 1 %32 Fast Fix Box Cutter Blade Replacement: passo 6, imagem 2 %32
    • Take the other half without the blade and put it back together with the other half with the blade.

    • Snap the two parts together.

    • Place the screw back in to hole while holding the casing together.

  7. Fast Fix Box Cutter Blade Replacement: passo 7, imagem 1 %32 Fast Fix Box Cutter Blade Replacement: passo 7, imagem 2 %32
    • Use Stanley #2, or any other #2, screwdriver to screw the casing back together.

    • To ensure proper placement of the blade, activate the mechanism that slides the blade out.

    • Once it comes out, like in second picture, you are done.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Peace Adeyemo

Membro desde: 02/22/18

145 Reputação

Autoria de 1 guia

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 13

Últimos 30 dias: 56

Duração total: 8,839