Ir para o conteúdo principal

Introdução

Eufy RoboVac 11S won’t work very efficiently when there’s too much dust in the filter. Instead of buying a new vacuum, you can replace some accessories to bring life back to your vacuum robot. This guide shows how to replace the foam filter and high-performance filter in the dust collector.

  1. Press the dust collector release button. Pull the dust collector out.
    • Press the dust collector release button.

    • Pull the dust collector out.

  2. Push the blue button up and open the dust collector. Empty the dust collector, and throw all the dust into the trash bin.
    • Push the blue button up and open the dust collector.

    • Empty the dust collector, and throw all the dust into the trash bin.

  3. Pull the hooks up to take out the pre-filter. Pull the filter lightly because the hook by the filter is easy to break. Pull the filter lightly because the hook by the filter is easy to break.
    • Pull the hooks up to take out the pre-filter.

    • Pull the filter lightly because the hook by the filter is easy to break.

  4. Take out the high-performance filter to the side and use a cleaning brush to clean the filter. Take out the foam filter to the side and dispose of it in the trash bin. Take out the foam filter to the side and dispose of it in the trash bin.
    • Take out the high-performance filter to the side and use a cleaning brush to clean the filter.

    • Take out the foam filter to the side and dispose of it in the trash bin.

  5. Use the cleaning brush to sweep the dust from the pre-filter.
    • Use the cleaning brush to sweep the dust from the pre-filter.

  6. Put the pre-filter back in the dust collector. Use your finger to push the top button first.
    • Put the pre-filter back in the dust collector.

    • Use your finger to push the top button first.

    • Push the filter lightly because the hook by the filter is easy to break.

  7. Open the back of the dust collector. Replace the white foam filter.
    • Open the back of the dust collector.

    • Replace the white foam filter.

    • Put the black high-performance filter at the top of the foam filter.

    • Make sure to put the foam filter before the high-performance filter, otherwise the robot will have problems cleaning.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

felix

Membro desde: 13/05/2020

145 Reputação

Autoria de 1 guia

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 24

Últimos 30 dias: 90

Duração total: 867