Conserte seus objetos Comunidade Loja

Etekcity Lasergrip 1080 Button Replacement

Introdução

This guide will teach you how to replace buttons that are not functioning properly. This will use a screwdriver and a plastic opening tool. There are no hazards involved.

O que você precisa

  1. Etekcity Lasergrip 1080 Button Replacement, Battery: passo 1, imagem 1 %32

    • Pull the battery cover away from the handle by gripping near the thumb groove.

    Editar

  2. Etekcity Lasergrip 1080 Button Replacement: passo 2, imagem 1 %32

    • Gently pull the battery out of the handle.

    • Excessive force could damage wires.

    Editar

  3. Etekcity Lasergrip 1080 Button Replacement: passo 3, imagem 1 %32 Etekcity Lasergrip 1080 Button Replacement: passo 3, imagem 2 %32

    • Disconnect the battery by pulling the connector away from it.

    • Positive first

    • Negative second

    • When replacing the battery, this order is reversed.

    Editar

  5. Etekcity Lasergrip 1080 Button Replacement, Buttons: passo 4, imagem 1 %32 Etekcity Lasergrip 1080 Button Replacement, Buttons: passo 4, imagem 2 %32

    • Remove the battery cover from the device by pulling it straight out.

    Editar

  6. Etekcity Lasergrip 1080 Button Replacement: passo 5, imagem 1 %32 Etekcity Lasergrip 1080 Button Replacement: passo 5, imagem 2 %32

    • Using the plastic opening tool remove the front and rear yellow covers.

    • When removing the back cover, be careful not to lose the buttons as they are not connected.

    Editar

  7. Etekcity Lasergrip 1080 Button Replacement: passo 6, imagem 1 %32

    • Remove the two 3.1 mm Phillips #0 screws.

    Editar

  8. Etekcity Lasergrip 1080 Button Replacement: passo 7, imagem 1 %32 Etekcity Lasergrip 1080 Button Replacement: passo 7, imagem 2 %32

    • Pull the two halves apart.

    • Be careful not to lose any components on the inside.

    Editar

  9. Etekcity Lasergrip 1080 Button Replacement: passo 8, imagem 1 %32

    • Realign the buttons with the button terminals.

    • Red terminal to red button.

    • Orange terminal to orange button.

    • Yellow terminal to yellow button.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 9 outros contribuidores

Patrick Crawford

Membro desde: 08/26/15

741 Reputação

Autoria de 6 guias

Emblemas: 15

+12 outros emblemas

Equipe

USF Tampa, Team 5-1, Blackwell Fall 2015 Membro de USF Tampa, Team 5-1, Blackwell Fall 2015

USFT-BLACKWELL-F15S5G1

Membros da 3

Autoria de 9 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 5

Últimos 30 dias: 10

Duração total: 459