Conserte seus objetos Comunidade Loja

Equity Alarm Clock 13014 Alarm Switch Replacement

Introdução

This guide details the process of an Equity Alarm Clock 13014 Alarm Switch Replacement. The alarm switch activates the alarm when it's set to go off. This guide requires some basic soldering.

O que você precisa

  1. Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: passo 1, imagem 1 %32 Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: passo 1, imagem 2 %32 Equity Alarm Clock 13014 Alarm Switch Replacement, Replacing the alarm switch: passo 1, imagem 3 %32

    • Remove the battery door using your finger nail or an opening tool.

    Editar

  2. Equity Alarm Clock 13014 Alarm Switch Replacement, Remove screws: passo 2, imagem 1 %32 Equity Alarm Clock 13014 Alarm Switch Replacement, Remove screws: passo 2, imagem 2 %32

    • Use a Phillips #1 screwdriver to remove the 3 screws on the back cover.

    Editar

  4. Equity Alarm Clock 13014 Alarm Switch Replacement, Remove Cover: passo 3, imagem 1 %32

    • Remove the back cover gently.

    • DO NOT pull the back cover off quickly or you may damage the wires connected.

    Editar

  5. Equity Alarm Clock 13014 Alarm Switch Replacement: passo 4, imagem 1 %32 Equity Alarm Clock 13014 Alarm Switch Replacement: passo 4, imagem 2 %32

    • Use a Phillips #1 screwdriver to remove the small screw located above the alarm switch.

    • Remove the small screw located below the alarm switch as well.

    Editar

  6. Equity Alarm Clock 13014 Alarm Switch Replacement: passo 5, imagem 1 %32 Equity Alarm Clock 13014 Alarm Switch Replacement: passo 5, imagem 2 %32

    • Place the end of the soldering iron on the end of the wire connected to the copper cylinder to detach the wire.

    • If you are unfamiliar with soldering, take a look at this article: How to Solder and Desolder Connections.

    • To replace the alarm switch, attach one end of new alarm switch wire to the copper cylinder.

    • Use a Phillips #1 screwdriver to reinstall the switch screws.

    • Follow steps in reverse order to assemble the clock.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 6

Últimos 30 dias: 13

Duração total: 1,079