Introdução

Replacing your ink cartridges.

When you are low on ink your green power light will be flashing and your error light will stay a solid red.
  • When you are low on ink your green power light will be flashing and your error light will stay a solid red.

Adicionar comentário

Lift the printer window open by pulling up on the tab.
  • Lift the printer window open by pulling up on the tab.

  • Your printer should now be in the same state as shown in the second picture.

Adicionar comentário

  • Press the button on the far right to get your ink cartridge holders to slide over. (See the second picture)

Adicionar comentário

  • Press the tabs with the upward facing arrows to open the hatches as shown in the first picture.

  • Remove the ink cartridge(s) that needs to be replaced. The black cartridge is on the left and the color cartridge is on the right.

  • Make sure your cartridges are the same as the ones shown in the third picture. Non-Epson ink cartridges may not be recognized by your printer.

Adicionar comentário

  • Insert your new ink cartridges and close the hatches.

  • Close your printer door and push the ink cartridge button on the far right and again.

  • After your ink charges you're ready to print!

Adicionar comentário

Linha de Chegada

Uma outra pessoa concluiu este guia.

Alex Lin

Member since: 10-04-2011

78 reputação

3 Guides authored

Equipe

Cal Poly, Team 20-68, Walters Spring 2011 Membro de Cal Poly, Team 20-68, Walters Spring 2011

CPSU-WALTERS-S11S20G68

4 Membros

6 Guides authored

I pushed the 3rd button so the cartridge holder will slide over, it will not move.

I tried unplugging the printer and plugging it back in & repower it up. still 'stuck' to the right.

I need to change the black ink. can you help? thank you!

tina - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 11

Todo: 2,444