Enabot EBO SE Wheels Replacement

Introdução

We'll take you step-by-step through the process of changing the wheels on your Enabot EBO SE in this tutorial, along with helpful advice to ensure a seamless installation. Wheels are essential to its overall performance and mobility. To guarantee optimum performance, it can eventually become necessary to replace the wheels owing to frequent use or wear and tear.

O que você precisa

Passo 1 Wheel Assembly

Enabot EBO SE Wheels Replacement, Wheel Assembly: passo 1, imagem 1 %32

Gently turn the robot upside down.
Place the robot on a stable surface to prevent it from rolling or falling.

Editar

Passo 2

Enabot EBO SE Wheels Replacement: passo 2, imagem 3 %32

Use a flathead 2.5 mm screwdriver to remove the 5.7 mm screw from the wheels.
A tool should have been provided in the box for this purpose.

Editar

Passo 3

Pull the wheel assembly towards you so it comes straight off without resistance.
If there is resistance, make sure to apply gentle force when pulling as it can get damaged with too much force.

Editar