Ir para o conteúdo principal

Eco X Gear Voice Coil Replacement

O que você precisa

  1. Eco X Gear Voice Coil Replacement, Frame: passo 1, imagem 1 %32
    • Disconnect any power source and/or turn off device.

  2. Eco X Gear Voice Coil Replacement: passo 2, imagem 1 %32
    • Remove the 15 rubber plugs from the cavities using needle nose pliers.

  3. Eco X Gear Voice Coil Replacement: passo 3, imagem 1 %32
    • Use a phillips head screwdriver to remove the fifteen 6.4mm screws.

  4. Eco X Gear Voice Coil Replacement: passo 4, imagem 1 %32
    • Carefully separate the two sections of the frame.

    • Wires still connect the two sections. Be cautious to avoid damaging the wires, terminals, and electronics.

  5. Eco X Gear Voice Coil Replacement, Voice Coil: passo 5, imagem 1 %32
    • Disconnect the wiring to improve accessibility to the cones.

  6. Eco X Gear Voice Coil Replacement: passo 6, imagem 1 %32 Eco X Gear Voice Coil Replacement: passo 6, imagem 2 %32
    • Remove the four screws that hold down the speaker and pry up the speaker from the frame.

  7. Eco X Gear Voice Coil Replacement: passo 7, imagem 1 %32
    • Once the voice coil is removed, solder it back onto the bracket or replace the voice coil entirely.

Conclusão

To reassemble your device, follow these instructions in reverse order.

James Lipsett

Membro desde: 03/20/17

625 Reputação

Autoria de 6 guias

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 0

Últimos 30 dias: 0

Duração total: 171