Conserte seus objetos Comunidade Loja

EVGA x17 Clicker Replacement

Introdução

This guide contains steps for replacing faulty clickers on the EVGA x17 gaming mouse. Malfunctioning clickers might be due to gunk buildup, broken parts, or faulty wiring. Follow this guide for instructions of how to replace them.

O que você precisa

  1. EVGA x17 Clicker Replacement, Clicker: passo 1, imagem 1 %32

    • Remove the mouse skates to reveal 5 screws.

    Editar

  2. EVGA x17 Clicker Replacement: passo 2, imagem 1 %32

    • Use a Phillips head screwdriver to remove the 5 screws that secure the bottom panel.

    Editar

  3. EVGA x17 Clicker Replacement: passo 3, imagem 1 %32

    • Remove the weight chamber cover.

    Editar

  5. EVGA x17 Clicker Replacement: passo 4, imagem 1 %32

    • Slowly slide a spudger into and around the bottom of the panel, prying until a "popping" sound is heard.

    Editar

  6. EVGA x17 Clicker Replacement: passo 5, imagem 1 %32 EVGA x17 Clicker Replacement: passo 5, imagem 2 %32

    • Remove the 13 screws on the interior.

    • There are 2 Phillips truss-head tapping screws, large circular heads, and the 11 Phillips screws from the interior.

    Editar

  7. EVGA x17 Clicker Replacement: passo 6, imagem 1 %32

    • Carefully slide the middle section out.

    Editar

  8. EVGA x17 Clicker Replacement: passo 7, imagem 1 %32

    • Remove the two screws from each clicker.

    Editar

  9. EVGA x17 Clicker Replacement: passo 8, imagem 1 %32

    • Pop and slide out each clicker that needs to be replaced.

    • Clickers may need to be tugged forward in their slots to slide out.

    • Be extra careful removing clickers because the attachments are fragile.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 3

Últimos 30 dias: 12

Duração total: 101