Introdução
Follow this guide to replace the belt on a EDCO Disk Grinder model 50200-HD.
This repair requires two people.
O que você precisa
-
-
Ensure the machine is unplugged.
-
Turn the power switch counterclockwise into the OFF position.
-
-
-
Use a 9/16 inch socket to remove the two bolts securing the weighted hood.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.