Pular para o conteúdo principal

Introdução

The Cyclone will need replacement if broken. There are multiple mechanisms in place to make access to the Cyclone easy.

  1. First, make sure the device is unplugged and detach the wand from the main unit. Pull the bin release trigger.
    • First, make sure the device is unplugged and detach the wand from the main unit.

    • Pull the bin release trigger.

    • Some force is required to slowly pull the trigger up. lift the Cyclone until it stops.

  2. While holding the disposal tab, press on the red button within the device. Continue to lift up with red button held until cyclone is removed. Make sure the bottom of the bin opens when the Cyclone is removed
    • While holding the disposal tab, press on the red button within the device.

    • Continue to lift up with red button held until cyclone is removed.

    • Make sure the bottom of the bin opens when the Cyclone is removed

  3. Pull the pre-filter up by the knob. Pull the pre-filter up by the knob.
    • Pull the pre-filter up by the knob.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Jesse Coward

Membro desde: 30-10-2017

101 reputação

Autoria de 1 guia

Equipe

UW Tacoma, Team S1-G5, Rose Fall 2017 Membro de UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Membros

7 Guias de autoria

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 2

Últimos 7 dias: 21

Últimos 30 dias: 77

Todo: 2,456