Pular para o conteúdo principal

Introdução

This guide will explain the process of removing the bin on the Dyson V8 Absolute. In the case of a broken or cracked bin, it is important to replace the bin for it to properly hold debris.

  1. Set the device upright on a flat surface and detach the wand.
    • Set the device upright on a flat surface and detach the wand.

    • Pull the red bin release trigger, on top of the cyclone. This will require some force.

  2. Pull up on the latch until it's fully extend. The bin will open to dispense debris once the red latch is pulled.
    • Pull up on the latch until it's fully extend.

    • The bin will open to dispense debris once the red latch is pulled.

  3. Push the red circular button to release the latch on the cyclone. The cyclone should release and be fully detached from the device.
    • Push the red circular button to release the latch on the cyclone.

    • The cyclone should release and be fully detached from the device.

  4. Push on the red release button on the bottom of the bin. The bin should slide away from the handle.
    • Push on the red release button on the bottom of the bin.

    • The bin should slide away from the handle.

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Miranda Laberge

Membro desde: 19-10-2017

453 reputação

2 Guias de autoria

Equipe

UW Tacoma, Team S1-G5, Rose Fall 2017 Membro de UW Tacoma, Team S1-G5, Rose Fall 2017

UWT-ROSE-F17S1G5

4 Membros

7 Guias de autoria

My bin seems to be more difficult to open all of the sudden and I have taken it all apart and put it back together. Still having the issue where the bin doesnt open when the cyclone pops up. HELP please

Rob Coughlin - Responder

I have a Dyson v8 and the red release button is stuck. What do I do.

Pamela Wanklyn - Responder

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 6

Últimos 7 dias: 43

Últimos 30 dias: 225

Todo: 4,757