Conserte seus objetos Comunidade Loja

Dyson DC56 Attachments Replacement

Introdução

The attachment holder is important to keep the attachment steady while using the vacuum. Without a proper way to hold attachments the vacuum can become unusable.

O que você precisa

  1. Dyson DC56 Attachments Replacement, Dust Bin: passo 1, imagem 1 %32

    • Make sure the vacuum is unplugged.

    • Warning: Avoid pressing the red trigger because it will turn on and begin suction.

    Editar

  2. Dyson DC56 Attachments Replacement: passo 2, imagem 1 %32

    • Locate the purple button at the top of the device.

    Editar

  3. Dyson DC56 Attachments Replacement: passo 3, imagem 1 %32

    • Separate the device with the purple button.

    Editar

  4. Dyson DC56 Attachments Replacement: passo 4, imagem 1 %32

    • Locate the dust bin's red release lever on the side of the device.

    • Make sure if the dust bin is full you open the vacuum over a trash can.

    Editar

  6. Dyson DC56 Attachments Replacement: passo 5, imagem 1 %32

    • Push the red lever to release the dust bin lid.

    Editar

  7. Dyson DC56 Attachments Replacement: passo 6, imagem 1 %32

    • Locate the red lever below the vacuum.

    Editar

  8. Dyson DC56 Attachments Replacement: passo 7, imagem 1 %32

    • Push the red lever, pull the back up and away from the dust bin to separate them.

    Editar

  9. Dyson DC56 Attachments Replacement, Attachments: passo 8, imagem 1 %32

    • Locate two screws at the back of the attachment holder.

    Editar

  10. Dyson DC56 Attachments Replacement: passo 9, imagem 1 %32

    • Use a T8-Torque screwdriver to take out the two 26mm screws out.

    Editar

  11. Dyson DC56 Attachments Replacement: passo 10, imagem 1 %32

    • Loosen the attachment holder by using a metal spudger.

    Editar

  12. Dyson DC56 Attachments Replacement: passo 11, imagem 1 %32

    • Remove the attachment holder.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

Autor(a)

com 4 outros contribuidores

John Czerkawski

Membro desde: 10/02/17

427 Reputação

Autoria de 4 guias

Emblemas: 7

+4 outros emblemas

Equipe

USF Tampa, Team S10-G1, Thompson Fall 2017 Membro de USF Tampa, Team S10-G1, Thompson Fall 2017

USFT-THOMPSON-F17S10G1

Membros da 4

Autoria de 11 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 6

Duração total: 764