Conserte seus objetos Comunidade Loja

Drobo FS DRDS2-A Power Switch Replacement

Introdução

How to replace the Power Switch

O que você precisa

  1. Drobo FS DRDS2-A Power Switch Replacement, Case: passo 1, imagem 1 %32

    • To start getting the case off remove the front panel so it's out of the way.

    Editar

  2. Drobo FS DRDS2-A Power Switch Replacement: passo 2, imagem 1 %32 Drobo FS DRDS2-A Power Switch Replacement: passo 2, imagem 2 %32

    • Next remove the screws from the feet of the case with a phillips head screwdriver.

    Editar

  3. Drobo FS DRDS2-A Power Switch Replacement: passo 3, imagem 1 %32

    • To remove the case, place the Drobo on its back and slide the case off.

    Editar

  5. Drobo FS DRDS2-A Power Switch Replacement, Power Switch: passo 4, imagem 1 %32 Drobo FS DRDS2-A Power Switch Replacement, Power Switch: passo 4, imagem 2 %32 Drobo FS DRDS2-A Power Switch Replacement, Power Switch: passo 4, imagem 3 %32

    • Press tabs to release back cover and lift off

    Editar

  6. Drobo FS DRDS2-A Power Switch Replacement: passo 5, imagem 1 %32 Drobo FS DRDS2-A Power Switch Replacement: passo 5, imagem 2 %32

    • Push tabs in and carefully pull out the front facer and drive shelves

    Editar

  7. Drobo FS DRDS2-A Power Switch Replacement: passo 6, imagem 1 %32 Drobo FS DRDS2-A Power Switch Replacement: passo 6, imagem 2 %32

    • Unscrew the back face by removing the screw on the back sides, then slide top face apart from the others

    • If you have a Drobo 5N2, you may also need to remove the 3 screws on each side.

    Editar

  8. Drobo FS DRDS2-A Power Switch Replacement: passo 7, imagem 1 %32 Drobo FS DRDS2-A Power Switch Replacement: passo 7, imagem 2 %32

    • Carefully unplug the Power Switch and Fan wires.

    Editar

  9. Drobo FS DRDS2-A Power Switch Replacement: passo 8, imagem 1 %32

    • Press tabs on Power Switch to release the Power Switch and Push out.

    • A Spudger like object is helpful for pushing in the tabs if the fan is not removed also

    Editar

  10. Drobo FS DRDS2-A Power Switch Replacement: passo 9, imagem 1 %32 Drobo FS DRDS2-A Power Switch Replacement: passo 9, imagem 2 %32

    • Finally pull the old switch out and pop the new one in.

    Editar
Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas executaram este guia.

Autor(a)

com 3 outros contribuidores

Rye Cassan

Membro desde: 01/24/17

155 Reputação

Autoria de 1 guia

Emblemas: 5

+2 outros emblemas

Equipe

Cal Poly, Team 10-4, Banghart Winter 2017 Membro de Cal Poly, Team 10-4, Banghart Winter 2017

CPSU-BANGHART-W17S10G4

Membros da 3

Autoria de 5 guias

4 comentários

Hello,

great info I found here, but where do I buy a replacement button for my Drobo in Europe?

Kind regards and thank you in advance,

Heinrich

Heinrich Voelkel - Responder

Hi, where do I find a replacement power switch for my Drobo 5N? BTW, thanks for the great tutorial!

Stephen R Parrott - Responder

I took my Drobo apart and the printed numbers on the switch are R13-112. I ordered these on Amazon:

https://www.amazon.com/Twidec-Rocker-Tog...

I put it in, crossed my fingers, and BAM, worked like a charm. Hope that helps all the future DIY’ers.

tdubs - Responder

Good article - thanks. Discovered my Drobo 5N (cir 2014) has a 3-wire spring-loaded switch with 2V LED (green) (wires: Red - White - Blue) Press once to turn on; Press and hold to manually turn off. Can simple R13-112 SPST switch be substituted?

John W - Responder

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 15

Últimos 30 dias: 41

Duração total: 2,103