Introdução

This guide walks through the process to replace the back speakers on the device. For safety reasons, you must first disconnect the battery from the device. After the battery is removed, you can follow the rest of the directions to replace the speakers safely.

  1. Insert the plastic opening tool between the white back cover and black front over.
    • Insert the plastic opening tool between the white back cover and black front over.

    Adicionar comentário

  2. Slide the plastic opening tool along the edgeof the device until back cover is detached and remove the cover.
    • Slide the plastic opening tool along the edgeof the device until back cover is detached and remove the cover.

    • You may need to pry the back cover off using the opening tool while moving it along the edge.

    Adicionar comentário

    • Remove the yellow tape holding the battery to the device using your fingers or plastic opening tool if necessary.

    Adicionar comentário

    • Use the hair dryer to melt the glue holding the battery to the device.

    • Be careful not to overheat the battery as it could cause the battery to combust.

    Adicionar comentário

    • Insert the plastic card under the battery and use it to remove the battery from the device.

    • Be careful not to deform the battery.

    Adicionar comentário

    • Desolder the red and black wires connecting the battery to the motherboard and remove the battery.

    Adicionar comentário

    • Desolder the red and black wires connecting each speaker to the motherboard.

    Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

Josh Null

Member since: 21-03-2018

313 reputação

3 Guides authored

Equipe

IUPUI, Team S5-G5, Baechle Spring 2018 Membro de IUPUI, Team S5-G5, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G5

3 Membros

3 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 4

Todo: 33