Conserte seus objetos Comunidade Loja

Dismantle Nespresso CitiZ

Introdução

For many repairs the CitiZ must be opened, this is shown here.

O que você precisa

  1. Dismantle Nespresso CitiZ, Dismantle Nespresso CitiZ: passo 1, imagem 1 %32

    • Never forget: pull the plug!

    • Remove all attachments: Water tank, capsule and cup drawer, drip tray.

    • The model shown is also equipped with a milk frother, remove that too.

    Traduzir

  2. Dismantle Nespresso CitiZ: passo 2, imagem 1 %32 Dismantle Nespresso CitiZ: passo 2, imagem 2 %32
    Ferramenta utilizada nesse passo:
    iFixit Precision 4 mm Screwdriver Bit
    $2.99
    Comprar

    • The bottom is secured by oval head screws.

    • These screws have an oval head that makes them look like rivets (picture 2). You need to use a special bit - also available at iFixit - for their removal. Here a DIY guide. If the right bit is not available, it could be done with a pair of needle nose pliers. Nespresso wants to keep us out of our own machines!!!

    • Remove five oval head screws securing the large bottom panel.

    • Note: this panel is smaller on models without milk frother.

    Traduzir

  3. Dismantle Nespresso CitiZ: passo 3, imagem 1 %32 Dismantle Nespresso CitiZ: passo 3, imagem 2 %32 Dismantle Nespresso CitiZ: passo 3, imagem 3 %32

    • The bottom panel is just snapped into place. Insert a metal spudger into the slots and lift the panel out. It sits quite tightly and you might use some force to get it out.

    Traduzir

  5. Dismantle Nespresso CitiZ: passo 4, imagem 1 %32

    • Remove the large bottom panel.

    Traduzir

  6. Dismantle Nespresso CitiZ: passo 5, imagem 1 %32

    • Use a spudger to slide off the two silicon tubes.

    Traduzir

  7. Dismantle Nespresso CitiZ: passo 6, imagem 1 %32 Dismantle Nespresso CitiZ: passo 6, imagem 2 %32

    • Disconnect the two spade plugs on the blue and brown wires from the power switch. The two left ones remain.

    Traduzir

  8. Dismantle Nespresso CitiZ: passo 7, imagem 1 %32

    • Remove four oval head screws from the small bottom panel.

    • Remove the main device from the base. It´s still connected with some wires, but this doesn´t bother much.

    Traduzir

  9. Dismantle Nespresso CitiZ: passo 8, imagem 1 %32 Dismantle Nespresso CitiZ: passo 8, imagem 2 %32 Dismantle Nespresso CitiZ: passo 8, imagem 3 %32

    • The two colored side panels are only snapped into place. However, the latches sit very tight. You really need a lot of force. First lift the lower edge using a plastic opening tool.

    • Depending from the model it might help, when you first pry off the coffee spout. (See next step)

    • Unfold each of the side panels upwards and remove them.

    Traduzir

  10. Dismantle Nespresso CitiZ: passo 9, imagem 1 %32

    • Insert a opening tool in the gap on the bottom of the coffee spout. Pry it off carefully.

    Traduzir
Conclusão

To reassemble your device, follow these instructions in reverse order.

4 outras pessoas executaram este guia.

Um agradecimento especial a esses tradutores:

de en

100%

VauWeh

VauWeh está nos ajudando a consertar o mundo! Quer contribuir?
Comece a traduzir ›

Autor(a)

com 1 outro contribuidor

VauWeh

Membro desde: 10/19/15

202.633 Reputação

Autoria de 246 guias

Emblemas: 44

+41 outros emblemas

Equipe

Repair is War on Entropy Membro de Repair is War on Entropy

Community

Membros da 25

Autoria de 1.107 guias

2 comentários

Wie geht es weiter um an die Heizung zu kommen? Vermutlich ist eine Reperatur nicht möglich.

Martin Gastberger - Responder

Ich denke der Teardown zeigt es: Nespresso CitiZ Teardown

VauWeh -

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 20

Últimos 7 dias: 150

Últimos 30 dias: 597

Duração total: 9,514