Introdução

This guide will allow you how to access the internal components of the device.

Peças

Não são necessárias peças.

Flip the device to the backside, and locate the metal tab at the center of the back cover.
  • Flip the device to the backside, and locate the metal tab at the center of the back cover.

Adicionar comentário

Lift the metal tab up, and rotate it counterclockwise. This will unlock the back case cover.
  • Lift the metal tab up, and rotate it counterclockwise. This will unlock the back case cover.

Adicionar comentário

Lift the battery plate off to either insert or remove 2 AA batteries. Lift the battery plate off to either insert or remove 2 AA batteries.
  • Lift the battery plate off to either insert or remove 2 AA batteries.

Adicionar comentário

With the wedge side of a spudger (or a small, flat head screwdriver), remove the black rubber case support from the device body. With the wedge side of a spudger (or a small, flat head screwdriver), remove the black rubber case support from the device body.
  • With the wedge side of a spudger (or a small, flat head screwdriver), remove the black rubber case support from the device body.

Adicionar comentário

With the pick side of a spudger (or tweezers), peel the sticky tape from the device. With the pick side of a spudger (or tweezers), peel the sticky tape from the device. With the pick side of a spudger (or tweezers), peel the sticky tape from the device.
  • With the pick side of a spudger (or tweezers), peel the sticky tape from the device.

Adicionar comentário

Split the front and rear panels by inserting a small pointed tool (such as a pen point or a screwdriver tip SL1.5) in the 5 plastic tabs along the sides of the device.
  • Split the front and rear panels by inserting a small pointed tool (such as a pen point or a screwdriver tip SL1.5) in the 5 plastic tabs along the sides of the device.

  • Do not remove the back panels quickly. If too much force is applied, there is a wire connection that will break.

  • CAUTION! Be careful not to force the tabs inward. This will result in broken tabs.

Adicionar comentário

With tweezers (or your fingernails), carefully disconnect the wires between the PC input and the motherboard. With tweezers (or your fingernails), carefully disconnect the wires between the PC input and the motherboard.
  • With tweezers (or your fingernails), carefully disconnect the wires between the PC input and the motherboard.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

6 outras pessoas concluíram este guia.

Ryan Green

Member since: 17-10-2010

81 reputação

Autoria de 1 guia

Equipe

Cal Poly, Team 21-30, Regan Fall 2010 Membro de Cal Poly, Team 21-30, Regan Fall 2010

CPSU-REGAN-F10S21G30

3 Membros

5 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 1

Últimos 7 dias: 7

Últimos 30 dias: 27

Todo: 3,966