Ir para o conteúdo principal

Disassembling iRobot Roomba 551 Bottom Plate

O que você precisa

  1. Disassembling iRobot Roomba 551 Bottom Plate, Side Brush: passo 1, imagem 1 %32
    • Place your Roomba upside-down on a hard surface.

  2. Disassembling iRobot Roomba 551 Bottom Plate: passo 2, imagem 1 %32
    • While holding the side brush in place, use a Phillips #1 screwdriver to remove the 4.5mm screw from the center of the brush.

  3. Disassembling iRobot Roomba 551 Bottom Plate: passo 3, imagem 1 %32
    • Gently pull upwards on the brush to remove it.

  4. Disassembling iRobot Roomba 551 Bottom Plate, Bottom Plate: passo 4, imagem 1 %32
    • Rotate the Roomba upside-down so the bottom is facing towards you.

  5. Disassembling iRobot Roomba 551 Bottom Plate: passo 5, imagem 1 %32 Disassembling iRobot Roomba 551 Bottom Plate: passo 5, imagem 2 %32
    • Using a Phillips #2 screwdriver, remove the captive screws that hold the bottom plate in place.

  6. Disassembling iRobot Roomba 551 Bottom Plate: passo 6, imagem 1 %32
    • Carefully lift the bottom plate.

    • The battery is only secured in place by the bottom plate, and may fall out once the bottom plate is removed.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Equipe

Cal Poly, Team 13-14, Regan Winter 2014 Membro de Cal Poly, Team 13-14, Regan Winter 2014

CPSU-REGAN-W14S13G14

Membros da 4

Autoria de 19 guias

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 4

Últimos 7 dias: 10

Últimos 30 dias: 26

Duração total: 2,215