O que você precisa
-
-
Use a large plastic opening tool along the rear panel:
-
There are 4 clips to release.
-
-
-
-
Slide out the hard drive as shown in the picture
-
-
-
Remove the 4 rubber piece from the plastic frame at each corner.
-
-
-
Remove both screws holding the retaining plate and the hard drive.
-
Slide the retaining plate in order to disconnect the SATA connector.
-
Quase terminado!
To reassemble your device, follow these instructions in reverse order.
Conclusão
To reassemble your device, follow these instructions in reverse order.