Ir para o conteúdo principal

Disassembling Sony Ericsson w600i LCD Section

O que você precisa

  1. Disassembling Sony Ericsson w600i LCD Section, Disassembling Sony Ericsson w600i Battery Cover: passo 1, imagem 1 %32
    • Grip the lower portion of the back of the phone and slide downwards.

  2. Disassembling Sony Ericsson w600i LCD Section, Battery: passo 2, imagem 1 %32
    • Lift battery at the rounded notch near the bottom of the phone.

  3. Disassembling Sony Ericsson w600i LCD Section, Back housing: passo 3, imagem 1 %32
    • Unscrew the four Torx screws from the backplate.

    • The backplate may begin to separate from the keypad face. Do not try to remove it yet.

    • The screws are T5 Torx screws, 5.6mm.

  4. Disassembling Sony Ericsson w600i LCD Section: passo 4, imagem 1 %32
    • Swivel the phone open.

  5. Disassembling Sony Ericsson w600i LCD Section: passo 5, imagem 1 %32
    • Using the Spudger, gently pry up the U-shaped grey cover below the keypad.

    • The cover is secured with adhesive tape. The gentler this is removed, the easier it will be to reassemble.

  6. Disassembling Sony Ericsson w600i LCD Section: passo 6, imagem 1 %32
    • Remove the two Torx screws from below the cover.

    • These are T5 Torx screws, 8.6mm.

  7. Disassembling Sony Ericsson w600i LCD Section: passo 7, imagem 1 %32
    • Gently work a spudger or a fingernail between the keypad face and the backplate.

    • The pieces are clipped together most tightly at the bottom loop section.

  8. Disassembling Sony Ericsson w600i LCD Section: passo 8, imagem 1 %32 Disassembling Sony Ericsson w600i LCD Section: passo 8, imagem 2 %32
    • Separate the keypad face from the backplate.

    • The keypad keys and the button component are both loose inside the phone, so take note of their orientation in case they become dislodged.

    • Take note of the braided cord's state. Upon reassembly it should be returned to the same orientation.

  9. Disassembling Sony Ericsson w600i LCD Section: passo 9, imagem 1 %32 Disassembling Sony Ericsson w600i LCD Section: passo 9, imagem 2 %32 Disassembling Sony Ericsson w600i LCD Section: passo 9, imagem 3 %32
    • Holding the backplate away from the swivel, remove the 4 small Phillips screws and both stamped struts from the swivel assembly.

    • Note that only the bottom strut has a tab.

    • The screws are Phillips, 2.9mm

  10. Disassembling Sony Ericsson w600i LCD Section: passo 10, imagem 1 %32
    • The back housing is now disassembled, and the swivel assembly is revealed.

  11. Disassembling Sony Ericsson w600i LCD Section, LCD Section: passo 11, imagem 1 %32 Disassembling Sony Ericsson w600i LCD Section, LCD Section: passo 11, imagem 2 %32
    • Remove the four black Phillips screws holding the swivel assembly to the LCD section of the phone.

    • Be mindful of the screws, as they are very small.

    • The screws are Phillips, 2.4mm

  12. Disassembling Sony Ericsson w600i LCD Section: passo 12, imagem 1 %32
    • Gently remove the grey plastic cover at the top-rear of the LCD section with a spudger.

    • It is secured with adhesive tape, the more gently you remove this piece, the easier reassembly will be later.

  13. Disassembling Sony Ericsson w600i LCD Section: passo 13, imagem 1 %32
    • Remove the two Torx screws revealed under the grey cover.

    • The screws are Torx T5, 5.6mm

  14. Disassembling Sony Ericsson w600i LCD Section: passo 14, imagem 1 %32
    • Gently pry off the front face, starting at the bottom slot.

  15. Disassembling Sony Ericsson w600i LCD Section: passo 15, imagem 1 %32
    • Remove the Torx screws near the buttons.

    • The screws are Torx T5, 5.6mm

  16. Disassembling Sony Ericsson w600i LCD Section: passo 16, imagem 1 %32 Disassembling Sony Ericsson w600i LCD Section: passo 16, imagem 2 %32
    • Remove the black front plate.

    • Remove the button overlay, taking note of its position for reassembly. There are small grey nubs that correspond to holes in the overlay.

  17. Disassembling Sony Ericsson w600i LCD Section: passo 17, imagem 1 %32
    • Gently release the small grey retaining clips around the outside of the display assembly.

    • Separate the display assembly from its backplate.

    • Take care; some of the side buttons may dislodge as the backplate is separated.

    • The LCD section is now disassembled.

Conclusão

To reassemble your device, follow these instructions in reverse order.

Uma outra pessoa concluiu este guia.

Beau Blanchard

Membro desde: 09/30/12

20 Reputação

Autoria de 6 guias

Equipe

0 comentários

Adicione um comentário

Exibir estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 2

Últimos 30 dias: 2

Duração total: 659