Peças

Não são necessárias peças.

Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.
  • Remove the battery (which also functions as the back cover) from the device. This step is not explicitly shown, but a picture without the battery cover shows the device post-battery removal.

Adicionar comentário

Use a Philip's head screw driver to remove the screws from the case.
  • Use a Philip's head screw driver to remove the screws from the case.

  • Place the screws in a small container to avoid losing them.

Adicionar comentário

  • Remove the front cover.

    • First, insert a small pry bar where the black front cover and white back cover meet.

    • Begin prying the black plastic up, slowing moving around to the bottom and other side.

    • At an angle, carefully pull up on the front cover separate the two pieces.

  • Excellent! Now you have removed the front cover!

Adicionar comentário

  • While looking down at the device, place your index finger at the top of the circuit board and your thumb on the device screen.

Adicionar comentário

  • Using your fingers, gently pull the top of the circuit board up toward you while also sliding the bottom of the circuit board away from the bottom of the Sirius Stiletto 100 back cover.

Adicionar comentário

  • Congratulations! You have successfully removed the internal circuit board from the Sirius Stiletto 100 back cover.

Adicionar comentário

Conclusão

To reassemble your device, follow these instructions in reverse order.

2 outras pessoas concluíram este guia.

Staten

Member since: 09-03-2012

69 reputação

Autoria de 1 guia

Equipe

Clemson, Team 2-1, Benson Spring 2012 Membro de Clemson, Team 2-1, Benson Spring 2012

CLEM-BENSON-S12S2G1

3 Membros

6 Guides authored

Adicionar comentário

Visualizar Estatísticas:

Últimas 24 horas: 0

Últimos 7 dias: 1

Últimos 30 dias: 5

Todo: 1,722