Esta versão pode conter edições incorretas. Mude para o último instantâneo verificado.
O que você precisa
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Flip over the turntable and remove the nine screws on the outer edges.
-
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Locate the largest circuit board inside the device.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Locate the wires that are plugged into the side of the circuit board.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Gently pull out the wires plugged into the circuit board.
-
-
Este passo não foi traduzido. Ajude a traduzi-lo
-
Once the wires are unplugged you will notice two more wires plugged into the bottom of the circuit board.
-
To completely remove the circuit board these wires must be removed.
-
Cancelar: não concluí este guia.
Uma outra pessoa concluiu este guia.